16/08/2019

Today we continued working on the reassembly process and manual. We also assembled the Stirling engine. We did a few tests with it. We tested it without the light and it worked. We then tested it again and the LED light glowed different colours at different times. We also tested the volts with the voltmeter and the amps with the amp meter. We measured them both at the same time and it and the highest voltage we got was 3.9 volts and the highest amps we got was 0.1. We also videoed it in slow motion with a timer next to it and on Wednesday we are going to the RPM of the Stirling engine. Luca is also going to work on the engine over the weekend and on Wednesday and friday, we are going to document it.